Compressor temperature sensor problem. -Wait two to three minutes. -Turn the power back on and start again. -Check for a clogged lint screen. -Check if the vent system is restricted. -If this information code remains, please contact a Samsung service centre.
Compressor temperature sensor problem. -Wait two to three minutes. -Turn the power back on and start again. -Check for a clogged lint screen. -Check if the vent system is restricted. -If this information code remains, please contact a Samsung service centre.
Likely cause: Heating element failed, thermostat drift, or control board fault
Check that the heating element is not cracked or corroded. Verify thermostat settings. Reset power at breaker for 30 seconds. If persists, heating element or thermostat needs replacement.
Difficulty: Moderate Repair
Consider calling a professional for this repair.
https://www.samsung.com/uk/support/home-appliances/check-the-information-codes-of-the-dryer/
Compressor temperature sensor problem. -Wait two to three minutes. -Turn the power back on and start again. -Check for a clogged lint screen. -Check if the vent system is restricted. -If this information code remains, please contact a Samsung service centre..
Heating element failed, thermostat drift, or control board fault.
Check that the heating element is not cracked or corroded. Verify thermostat settings. Reset power at breaker for 30 seconds. If persists, heating element or thermostat needs replacement. Estimated repair cost: $200-450.
This is rated as moderate repair. This may require a professional technician.