The dishwasher may stop partway or won’t finish a cycle, displaying HC1. Ensure the dishwasher isn’t fed with excessively hot water. Clean the filters so that water circulates properly.
The dishwasher may stop partway or won’t finish a cycle, displaying HC1. Ensure the dishwasher isn’t fed with excessively hot water. Clean the filters so that water circulates properly.
Likely cause: Water temperature sensor out of range, supply line reversed, or heater fault
Verify water heater is set to 120-140°F. Check that both hot and cold supply lines are connected correctly. Test water temperature sensor with multimeter. Reset power at breaker for 30 seconds. If persists, water temperature sensor needs replacement.
Difficulty: Moderate Repair
Consider calling a professional for this repair.
https://www.samsung.com/uk/support/home-appliances/displayed-information-codes-on-my-dishwasher/
The dishwasher may stop partway or won’t finish a cycle, displaying HC1. Ensure the dishwasher isn’t fed with excessively hot water. Clean the filters so that water circulates properly..
Water temperature sensor out of range, supply line reversed, or heater fault.
Verify water heater is set to 120-140°F. Check that both hot and cold supply lines are connected correctly. Test water temperature sensor with multimeter. Reset power at breaker for 30 seconds. If persists, water temperature sensor needs replacement. Estimated repair cost: $200-400.
This is rated as moderate repair. This may require a professional technician.
Search 49,307 Samsung manuals in our database for installation specs, wiring diagrams, and service procedures.