Why Does My Dishwasher Smell: 7 Causes and Fixes
Published by Appliance Medic — September 2026
Quick Assessment: Before troubleshooting, unplug the appliance and identify the exact symptom. Most issues have a single primary cause — work through the list below to isolate it.
Common Causes
Based on thousands of repair cases documented by Appliance Medic, the most common causes are listed in order of likelihood.
- Worn or damaged component — Inspect for visible wear, corrosion, or physical damage.
- Clogged or blocked passage — Debris, mineral buildup, or foreign objects. Check and clean.
- Faulty sensor or control board — Reset first (unplug 5 min), then test the sensor.
- Wiring or connection issue — Loose, corroded, or damaged wiring. Check all connections.
Step-by-Step Diagnosis
- Unplug the appliance and wait 5 minutes for capacitors to discharge.
- Access the relevant component — refer to the manufacturer's installation manual.
- Inspect for visible damage — look for corrosion, burns, cracks, or deformation.
- Test continuity with a multimeter. Compare against our component resistance database.
- Replace the faulty part if testing confirms the diagnosis.
- Reassemble and test — plug back in and run a full cycle.
When to Call a Pro
- The issue involves gas lines or high-voltage components (over 480V)
- You've replaced the obvious part and the problem persists
- The appliance is still under warranty
- You're not comfortable working with electrical components