Water Supply • Water supply valve is blocked by foreign material • The water supply valve terminal is not connected • The warm water and rinse connectors are wrongly connected to each other • PCB terminal from the drain hose to the detergent drawer is not connected • Hose is folded or torn • If the water supply valve has a wire disconnected, replace it • Check whether the water supply valve is clogged with foreign material and whether water is supplied continually • If the PBA relay operates abnormally, replace the PBA
Water Supply • Water supply valve is blocked by foreign material • The water supply valve terminal is not connected • The warm water and rinse connectors are wrongly connected to each other • PCB terminal from the drain hose to the detergent drawer is not connected • Hose is folded or torn • If the water supply valve has a wire disconnected, replace it • Check whether the water supply valve is clogged with foreign material and whether water is supplied continually • If the PBA relay operates abnormally, replace the PBA
Likely cause: Water supply restricted, inlet valve failed, or inlet filter clogged
Check that water supply valves are fully open, inlet hose is not kinked or blocked, and inlet filter is clean. Reset power at breaker for 30 seconds. If persists, inlet valve needs replacement.
Difficulty: Moderate Repair
Consider calling a professional for this repair.
https://www.samsung.com/ph/support/home-appliances/samsung-front-load-washer-error-codes/
Water Supply • Water supply valve is blocked by foreign material • The water supply valve terminal is not connected • The warm water and rinse connectors are wrongly connected to each other • PCB terminal from the drain hose to the detergent drawer is not connected • Hose is folded or torn • If the water supply valve has a wire disconnected, replace it • Check whether the water supply valve is clogged with foreign material and whether water is supplied continually • If the PBA relay operates abnormally, replace the PBA.
Water supply restricted, inlet valve failed, or inlet filter clogged.
Check that water supply valves are fully open, inlet hose is not kinked or blocked, and inlet filter is clean. Reset power at breaker for 30 seconds. If persists, inlet valve needs replacement. Estimated repair cost: $150-400.
This is rated as moderate repair. This may require a professional technician.