Water Level sensor • Water level sensor fault • Incorrect connections of the water level sensor terminal • The hose part for the water level sensor is folded • The hose is clogged with foreign material • Check the water level sensor terminal connections and contacts • Check the material code to ensure correct water level sensor is used • If the water level sensor is faulty, replace it
Water Level sensor • Water level sensor fault • Incorrect connections of the water level sensor terminal • The hose part for the water level sensor is folded • The hose is clogged with foreign material • Check the water level sensor terminal connections and contacts • Check the material code to ensure correct water level sensor is used • If the water level sensor is faulty, replace it
Likely cause: Sensor wire broken, sensor degraded, or control board not reading sensor
Check sensor wiring for damage or disconnection. Test sensor resistance with a multimeter (compare to spec in service manual). Reset power at breaker for 30 seconds. If sensor reads out of range, replace the sensor.
Difficulty: Moderate Repair
Consider calling a professional for this repair.
https://www.samsung.com/ph/support/home-appliances/samsung-front-load-washer-error-codes/
Water Level sensor • Water level sensor fault • Incorrect connections of the water level sensor terminal • The hose part for the water level sensor is folded • The hose is clogged with foreign material • Check the water level sensor terminal connections and contacts • Check the material code to ensure correct water level sensor is used • If the water level sensor is faulty, replace it.
Sensor wire broken, sensor degraded, or control board not reading sensor.
Check sensor wiring for damage or disconnection. Test sensor resistance with a multimeter (compare to spec in service manual). Reset power at breaker for 30 seconds. If sensor reads out of range, replace the sensor. Estimated repair cost: $150-400.
This is rated as moderate repair. This may require a professional technician.