Water fill error.
Water fill error.
Likely cause: Water inlet, drain, or pressure sensor fault
Power cycle the washer (unplug 30 seconds). Check water supply valves are open, inlet filter is clean, and drain hose is not kinked. Run a tub clean cycle. If error persists, the inlet valve, drain pump, or pressure switch may need replacement.
Difficulty: Moderate Repair
Consider calling a professional for this repair.
Water fill error..
Water inlet, drain, or pressure sensor fault.
Power cycle the washer (unplug 30 seconds). Check water supply valves are open, inlet filter is clean, and drain hose is not kinked. Run a tub clean cycle. If error persists, the inlet valve, drain pump, or pressure switch may need replacement. Estimated repair cost: $150-400.
This is rated as moderate repair. This may require a professional technician.
Search 27,905 GE manuals in our database for installation specs, wiring diagrams, and service procedures.