The safety switch has detected water in the base of the dishwasher. Your leakage protection system has been activated. Please turn off the water inflow and contact Bosch Customer Support at 1-800-944-2904 for assistance. See more
The safety switch has detected water in the base of the dishwasher. Your leakage protection system has been activated. Please turn off the water inflow and contact Bosch Customer Support at 1-800-944-2904 for assistance. See more
Likely cause: Water supply connection loose, pump gasket failed, or float switch activated
Check for standing water under and around the unit. Inspect door seal, water supply connections, and drain hose for leaks. Clean the sump/sump filter. Reset power at breaker for 30 seconds. If leak persists, water valve or pump assembly needs replacement.
Difficulty: Moderate Repair
Consider calling a professional for this repair.
https://www.bosch-home.com/us/owner-support/error-codes/dishwashers
The safety switch has detected water in the base of the dishwasher. Your leakage protection system has been activated. Please turn off the water inflow and contact Bosch Customer Support at 1-800-944-2904 for assistance. See more.
Water supply connection loose, pump gasket failed, or float switch activated.
Check for standing water under and around the unit. Inspect door seal, water supply connections, and drain hose for leaks. Clean the sump/sump filter. Reset power at breaker for 30 seconds. If leak persists, water valve or pump assembly needs replacement. Estimated repair cost: $200-400.
This is rated as moderate repair. This may require a professional technician.
Search 11,371 Bosch manuals in our database for installation specs, wiring diagrams, and service procedures.