The drainage hose is blocked or kinked. 1. Clean the filters in the water supply hose. Attention : The leaking water may be very hot with a risk of scalding. Set program to OFF. Pull out the main plug. Check whether the drainage hose has been installed without kinks. Loosen the hose clip on the siphon and carefully remove drainage hose and any residual water. Clean drainage hose and siphon spigot. Hold drainage hose in a bucket and select the DRAIN program. Connect drainage hose to the siphon an
The drainage hose is blocked or kinked. 1. Clean the filters in the water supply hose. Attention : The leaking water may be very hot with a risk of scalding. Set program to OFF. Pull out the main plug. Check whether the drainage hose has been installed without kinks. Loosen the hose clip on the siphon and carefully remove drainage hose and any residual water. Clean drainage hose and siphon spigot. Hold drainage hose in a bucket and select the DRAIN program. Connect drainage hose to the siphon an
Likely cause: Water supply restricted, inlet valve failed, or inlet filter clogged
Check that water supply valves are fully open, inlet hose is not kinked or blocked, and inlet filter is clean. Reset power at breaker for 30 seconds. If persists, inlet valve needs replacement.
Difficulty: Moderate Repair
Consider calling a professional for this repair.
https://www.bosch-home.com/us/owner-support/error-codes/washers
The drainage hose is blocked or kinked. 1. Clean the filters in the water supply hose. Attention : The leaking water may be very hot with a risk of scalding. Set program to OFF. Pull out the main plug. Check whether the drainage hose has been installed without kinks. Loosen the hose clip on the siphon and carefully remove drainage hose and any residual water. Clean drainage hose and siphon spigot. Hold drainage hose in a bucket and select the DRAIN program. Connect drainage hose to the siphon an.
Water supply restricted, inlet valve failed, or inlet filter clogged.
Check that water supply valves are fully open, inlet hose is not kinked or blocked, and inlet filter is clean. Reset power at breaker for 30 seconds. If persists, inlet valve needs replacement. Estimated repair cost: $150-400.
This is rated as moderate repair. This may require a professional technician.
Search 11,371 Bosch manuals in our database for installation specs, wiring diagrams, and service procedures.