There is an issue with water flow into the dishwasher. The water level is too low, or water is not being pumped correctly. 1. Check the inlet hose and make sure it isn't kinked or damaged. 2. Make sure the water supply is turned on. The water flow rate should be 10 l/min. For further assistance, please contact Bosch Customer Support at 1-800-944-2904 . See more
There is an issue with water flow into the dishwasher. The water level is too low, or water is not being pumped correctly. 1. Check the inlet hose and make sure it isn't kinked or damaged. 2. Make sure the water supply is turned on. The water flow rate should be 10 l/min. For further assistance, please contact Bosch Customer Support at 1-800-944-2904 . See more
Likely cause: Water supply restricted, inlet valve failed, or inlet filter clogged
Check that water supply valves are fully open, inlet hose is not kinked or blocked, and inlet filter is clean. Reset power at breaker for 30 seconds. If persists, inlet valve needs replacement.
Difficulty: Moderate Repair
Consider calling a professional for this repair.
https://www.bosch-home.com/us/owner-support/error-codes/dishwashers
There is an issue with water flow into the dishwasher. The water level is too low, or water is not being pumped correctly. 1. Check the inlet hose and make sure it isn't kinked or damaged. 2. Make sure the water supply is turned on. The water flow rate should be 10 l/min. For further assistance, please contact Bosch Customer Support at 1-800-944-2904 . See more.
Water supply restricted, inlet valve failed, or inlet filter clogged.
Check that water supply valves are fully open, inlet hose is not kinked or blocked, and inlet filter is clean. Reset power at breaker for 30 seconds. If persists, inlet valve needs replacement. Estimated repair cost: $200-400.
This is rated as moderate repair. This may require a professional technician.
Search 11,371 Bosch manuals in our database for installation specs, wiring diagrams, and service procedures.