Whirlpool WP

22 manual(s) 31 error code(s) 0 guide(s)

📖 Service Manuals

⚡ Whirlpool Error Codes

F21
Long drain time
F51
Motor rotor position sensor
F2E2
Stuck button on control panel
F8E1
Water supply problem
F2E1
Washer/Range
F5E2
Washer
F9E1
Washer
F1E1
All
F0 E1
Stuck Key Error
F0 E2
Too Much Suds
F0 E5
Load Detected with Lid Open
F1 E1
Motor Control Error
F1 E2
Main Board Error
F3 E1
Water Level Sensor Error
F5 E1
Lid Switch Error
F5 E2
Door Lock Error
F7 E1
Motor Speed Error
F8 E1
Water Supply Error
F8 E2
Dispenser Error
F9 E1
Drain Error

+11 more codes — view all

⚙️ Component Test Values

heating element (general)

Normal: 0.0–120.0Ω Any component that consumes power

solenoid (on off)

Normal: 10.0–NoneΩ On/off solenoids > 10Ω

solenoid (regulating)

Normal: 0.0–10.0Ω Regulating solenoids < 10Ω

motor (general)

Normal: 10.0–200.0Ω General appliance motors

water inlet valve (general)

Normal: 500.0–1500.0Ω Water inlet valve

switch (door switch)

Normal: 0.0–0.0Ω 0Ω when closed, OL when open

switch (bimetal switch)

Normal: 0.0–1.0Ω Bi-metal switch

thermostat (general)

Normal: 0.0–0.0Ω 0Ω when closed, OL when open

thermistor (general)

Normal: 2000.0–220000.0Ω Check spec for your specific thermistor. NTC: Ω decreases as temp increases. PTC

fuse (general)

Normal: 0.0–1.0Ω < 1Ω when good, OL when blown