← Back to Appliance Medic

Electrolux Eft

17 manual(s) 30 error code(s) 0 guide(s)

📖 Service Manuals

⚡ Electrolux Error Codes

d9
Water inlet valve leak detected
dA
Dispenser system issue
dE
Water temperature sensor error
Ld
Water leak detected
LE
Motor locked — motor won't turn
SE
Communication error between control boards
UE
Unbalanced load — washer cannot spin
tE
Water temperature issue
tO
Door not closed properly
Sd
Excessive suds detected
E11
Water intake error
E12
Drain error
E13
Door lock error
E14
Water leak detected.
E15
Water level sensor error.
E16
Unbalanced load
E17
Motor error
E18
Temperature sensor error.
E19
Communication error between boards.
E20
Control board error.

+10 more codes — view all

⚙️ Component Test Values

heating element (general)

Normal: 0.0–120.0Ω Any component that consumes power

solenoid (on off)

Normal: 10.0–NoneΩ On/off solenoids > 10Ω

solenoid (regulating)

Normal: 0.0–10.0Ω Regulating solenoids < 10Ω

motor (general)

Normal: 10.0–200.0Ω General appliance motors

water inlet valve (general)

Normal: 500.0–1500.0Ω Water inlet valve

switch (door switch)

Normal: 0.0–0.0Ω 0Ω when closed, OL when open

switch (bimetal switch)

Normal: 0.0–1.0Ω Bi-metal switch

thermostat (general)

Normal: 0.0–0.0Ω 0Ω when closed, OL when open

thermistor (general)

Normal: 2000.0–220000.0Ω Check spec for your specific thermistor. NTC: Ω decreases as temp increases. PTC

fuse (general)

Normal: 0.0–1.0Ω < 1Ω when good, OL when blown

← Appliance Medic · Search all manuals