🌀 Washer will not start

⚠️ Common Causes

Power supply issue, lid switch failure, control lock enabled, defective control board

🔧 Parts to Check

• Power supply/cord
• Lid switch
• Control lock
• Control board

🔧 Troubleshooting Steps

1. Verify outlet power: plug another device into same outlet
2. Check power cord: inspect for damage, test continuity
3. Check lid switch: washer will not start if lid switch is open or broken
4. Disable control lock: hold Options or Lock button 3 seconds
5. Check circuit breaker: reset breaker if tripped

💡 Related Resources

• Look up error codes for your appliance
• Component failure reference — ohm ranges and test procedures
• All troubleshooting guides — browse by appliance type
• Find service manuals for your specific model