🌀 Washer shaking or walking during spin

⚠️ Common Causes

Unbalanced load, leveling feet not adjusted, suspension springs failed, shock absorbers worn, spider arm broken (HE washers)

🔧 Parts to Check

• Leveling feet
• Suspension springs
• Shock absorbers
• Spider arm

🔧 Troubleshooting Steps

1. Check leveling — place level on top of washer. All 4 feet should be firm on floor. Adjust as needed
   ✓ Expected: Washer level and stable
2. Check load balance — redistribute items evenly in drum. Don't wash single heavy items alone
   ✓ Expected: Load balanced
3. Check suspension springs (top-load) — springs should be intact and properly hooked. If broken, replace all 3-4
   ✓ Expected: Springs intact
4. Check shock absorbers (front-load) — press down on washer top, should not bounce excessively. Worn shocks allow tub to swing
   ✓ Expected: Minimal bounce
5. Check spider arm (HE washers) — remove tub, inspect metal spider arm behind tub for cracks. Broken spider causes massive vibration
   ✓ Expected: No cracks in spider
6. Check tub bearings — spin tub by hand, should be smooth. Grinding noise = bad bearing assembly
   ✓ Expected: Smooth rotation

💡 Related Resources

• Look up error codes for your appliance
• Component failure reference — ohm ranges and test procedures
• All troubleshooting guides — browse by appliance type
• Find service manuals for your specific model