🌀 Washer leaking water

⚠️ Common Causes

Door boot seal failed, drain hose connection loose, water inlet hose connection loose, tub crack, pump hose disconnected

🔧 Parts to Check

• Door seal
• Drain hose
• Inlet hoses
• Pump hose

🔧 Troubleshooting Steps

1. Identify where water is coming from — front (door seal), back (hoses/pump), bottom (tub/pump)
   ✓ Expected: Note leak location
2. Check door boot seal (front-load) — inspect for tears, holes, or debris in seal fold
   ✓ Expected: Seal intact, clean
3. Check inlet hose connections — tighten connections at wall and washer, check for cracks in hoses
   ✓ Expected: Connections tight, no drips
4. Check drain hose connection at pump — hose should be securely clamped
   ✓ Expected: Secure connection
5. Check pump hose connections — remove panels, inspect all pump inlet/outlet hoses
   ✓ Expected: All connections secure
6. Inspect tub for cracks — look through the spider shaft area for visible cracks
   ✓ Expected: No cracks visible

💡 Related Resources

• Look up error codes for your appliance
• Component failure reference — ohm ranges and test procedures
• All troubleshooting guides — browse by appliance type
• Find service manuals for your specific model