🌀 Washer fills but does not drain

⚠️ Common Causes

Clogged drain pump filter, kinked drain hose, faulty drain pump, clogged drain line

🔧 Parts to Check

• Drain pump filter
• Drain hose
• Drain pump
• Drain line/standpipe

🔧 Troubleshooting Steps

1. Clean drain pump filter: locate filter access panel (bottom front), unscrew filter, remove debris
2. Check drain hose: ensure hose is not kinked, crushed, or blocked
3. Check standpipe height: drain hose should not be inserted more than 8 inches
4. Test drain pump: remove pump, check for foreign objects (coins, buttons)
5. Test control board drain signal: verify board sends 120V to pump during drain cycle

💡 Related Resources

• Look up error codes for your appliance
• Component failure reference — ohm ranges and test procedures
• All troubleshooting guides — browse by appliance type
• Find service manuals for your specific model