🔥 Stove burner not lighting (gas)

⚠️ Common Causes

Igniter failed, gas supply issue, burner cap misaligned, clogged burner ports, electrode dirty

🔧 Parts to Check

• Igniter
• Burner cap
• Gas valve
• Electrode

🔧 Troubleshooting Steps

1. Check if burner cap is properly seated — misaligned cap prevents flame from reaching pot
   ✓ Expected: Cap centered and flat
2. Check for spark — turn burner on, listen/look for spark at electrode. If no spark, igniter failed
   ✓ Expected: Audible click and visible spark
3. Clean burner ports — food debris can block gas flow. Use a pin or needle to clear ports
   ✓ Expected: All ports clear
4. Check electrode position — should be ¼" from burner. If too far, spark won't ignite gas
   ✓ Expected: ¼" gap
5. Clean electrode with alcohol — carbon buildup prevents sparking
   ✓ Expected: Electrode clean
6. If no spark: test igniter with multimeter. Should glow bright orange. If dim, replace igniter
   ✓ Expected: Bright orange glow

💡 Related Resources

• Look up error codes for your appliance
• Component failure reference — ohm ranges and test procedures
• All troubleshooting guides — browse by appliance type
• Find service manuals for your specific model