🔥 Oven door will not lock for self-clean

⚠️ Common Causes

Door lock assembly failed, control board relay failed, door hinge misaligned

🔧 Parts to Check

• Door lock assembly
• Control board
• Door hinges

🔧 Troubleshooting Steps

1. Check door lock mechanism: manually push lock rod — should engage smoothly
2. Test door lock actuator: apply 120V directly — should engage within 30 seconds
3. Reset oven: unplug for 5 minutes, plug back in, try self-clean again
4. Check door alignment: ensure door sits squarely when closed

💡 Related Resources

• Look up error codes for your appliance
• Component failure reference — ohm ranges and test procedures
• All troubleshooting guides — browse by appliance type
• Find service manuals for your specific model