🌀 KitchenAid washer displays 7 error code (motor error)

🔧 Troubleshooting Steps

1. Check the drive belt — it should be tight enough to have 1/2 inch of deflection. A loose belt causes the tub to not reach spin speed
   ✓ Expected: Belt tension correct
2. Check the drive pulley and transmission coupling. If the belt is properly tensioned but the tub spins slowly, the transmission may be slipping
   ✓ Expected: Pulley and coupling intact
3. Check the motor coupler (between motor and transmission). KitchenAid top-loaders use a plastic coupler that is a known failure point. If cracked or sheared, the motor spins but the tub doesn't
   ✓ Expected: Coupler intact
4. If the coupler is intact, check the transmission for internal wear. A worn transmission makes grinding noises and doesn't maintain spin speed
   ✓ Expected: Transmission smooth, no grinding
5. If all mechanical components check out, check the motor itself. Listen for the motor running during the spin cycle. If the motor hums but doesn't spin, the motor windings may be failing
   ✓ Expected: Motor spins at full speed

💡 Related Resources

• KitchenAid manuals & error codes — model-specific documentation
• Look up error codes for your appliance
• Component failure reference — ohm ranges and test procedures
• All troubleshooting guides — browse by appliance type
• Find service manuals for your specific model