🧊 GE refrigerator ice maker not making ice (no water to ice maker)

🔧 Troubleshooting Steps

1. Verify the water supply line is connected and the shut-off valve is fully open
   ✓ Expected: Water flows
2. Check the water inlet valve at the back of the refrigerator. Listen for the solenoid clicking when the ice maker calls for water
   ✓ Expected: Solenoid clicks, water flows
3. If no water flows, check the inlet valve for 120V during the fill cycle. No voltage = control board issue
   ✓ Expected: 120V at valve
4. Check the ice maker's water fill cup — it can freeze solid, blocking the fill
   ✓ Expected: Fill cup not blocked
5. If the ice maker has an auger motor: if ice is made but not dispensing, the auger motor or gear train may be seized. Check the drive gear on the auger shaft
   ✓ Expected: Auger rotates freely

💡 Related Resources

• GE manuals & error codes — model-specific documentation
• Look up error codes for your appliance
• Component failure reference — ohm ranges and test procedures
• All troubleshooting guides — browse by appliance type
• Find service manuals for your specific model