♨️ Frigidaire dryer displays F11 error (no heat)

🔧 Troubleshooting Steps

1. Measure the heating element resistance. Should read 10-30Ω. Infinite = open, replace element
   ✓ Expected: 10-30Ω
2. Check the thermal fuse on the blower housing. Should read 0Ω. Open = blown, replace and find the overheating cause
   ✓ Expected: 0Ω — fuse intact
3. Check the high-limit thermostat. Should read continuity at room temperature
   ✓ Expected: Continuity
4. If all components test good, check for 240V at the element during a heat cycle. No 240V = control board relay issue
   ✓ Expected: 240V at element
5. Clean the vent path from the dryer to the outside. A blocked vent causes overheating which can blow the thermal fuse
   ✓ Expected: Vent clear, good airflow

💡 Related Resources

• Frigidaire manuals & error codes — model-specific documentation
• Look up error codes for your appliance
• Component failure reference — ohm ranges and test procedures
• All troubleshooting guides — browse by appliance type
• Find service manuals for your specific model