🔥 Electric cooktop burner will not heat

⚠️ Common Causes

Failed heating element, poor terminal connection, broken infinite switch

🔧 Parts to Check

• Heating element
• Terminal block
• Infinite switch

🔧 Troubleshooting Steps

1. Test element: check continuity — should read 15-60Ω. Open circuit = replace
2. Check terminal block: inspect terminals for arcing/burning
3. Test infinite switch: check continuity at different heat settings

💡 Related Resources

• Look up error codes for your appliance
• Component failure reference — ohm ranges and test procedures
• All troubleshooting guides — browse by appliance type
• Find service manuals for your specific model