♨️ Dryer taking too long to dry

⚠️ Common Causes

Vent blocked or too long, heating element partially failed, thermal fuse partially open, moisture sensor dirty, overloading

🔧 Parts to Check

• Vent duct
• Heating element
• Moisture sensor
• Lint filter

🔧 Troubleshooting Steps

1. Check vent duct — disconnect from dryer, verify good airflow. Clean lint from entire run. Max length: 25ft (2 elbows = 5ft deduction)
   ✓ Expected: Clear airflow, lint-free
2. Clean lint filter every load — a partially clogged filter restricts airflow dramatically
   ✓ Expected: Filter clean
3. Check moisture sensor bars (inside drum) — clean with rubbing alcohol. Dirty bars = dryer thinks clothes are still wet
   ✓ Expected: Sensor bars clean and shiny
4. Verify dryer is producing heat — use oven thermometer in drum, should reach 120-150°F on high heat
   ✓ Expected: 120-150°F
5. Check heating element — inspect for broken coils. Test resistance: 10-30Ω
   ✓ Expected: 10-30Ω, no breaks
6. Check load size — don't overload. Dryer needs room for air circulation. Max ¾ full
   ✓ Expected: Load not overloaded

💡 Related Resources

• Look up error codes for your appliance
• Component failure reference — ohm ranges and test procedures
• All troubleshooting guides — browse by appliance type
• Find service manuals for your specific model