Short Humidity Sensor Error
Short Humidity Sensor Error
Likely cause: Sensor wire broken, sensor degraded, or control board not reading sensor
Check sensor wiring for damage or disconnection. Test sensor resistance with a multimeter (compare to spec in service manual). Reset power at breaker for 30 seconds. If sensor reads out of range, replace the sensor.
Difficulty: Moderate Repair
Consider calling a professional for this repair.
https://www.samsung.com/ca/support/home-appliances/meaning-of-error-codes-on-your-samsung-microwave/
Short Humidity Sensor Error.
Sensor wire broken, sensor degraded, or control board not reading sensor.
Check sensor wiring for damage or disconnection. Test sensor resistance with a multimeter (compare to spec in service manual). Reset power at breaker for 30 seconds. If sensor reads out of range, replace the sensor. Estimated repair cost: $150-300.
This is rated as moderate repair. This may require a professional technician.
Search 49,307 Samsung manuals in our database for installation specs, wiring diagrams, and service procedures.