The temperature sensor has detected that the oven's temperature is rising higher than the normal rate. This is generally caused by the vent (which is located on the back of the cooktop) being blocked or partially blocked. If the vent is covered by something, like a pan, remove it. While still cooking, you can clear the error by opening and closing the door a few times for about 3 seconds at a time. This will allow for the release of warm air and force some out of the vent. You can also turn off
The temperature sensor has detected that the oven's temperature is rising higher than the normal rate. This is generally caused by the vent (which is located on the back of the cooktop) being blocked or partially blocked. If the vent is covered by something, like a pan, remove it. While still cooking, you can clear the error by opening and closing the door a few times for about 3 seconds at a time. This will allow for the release of warm air and force some out of the vent. You can also turn off
Likely cause: Door not fully latched, latch mechanism damaged, or door sensor fault
Ensure door/lid is fully closed and latched. Check for obstructions preventing closure. Inspect door latch and strike for damage. Reset power at breaker for 30 seconds. If persists, door latch assembly or door sensor needs replacement.
Difficulty: Moderate Repair
Consider calling a professional for this repair.
https://www.samsung.com/us/support/troubleshoot/TSG10003529/
The temperature sensor has detected that the oven's temperature is rising higher than the normal rate. This is generally caused by the vent (which is located on the back of the cooktop) being blocked or partially blocked. If the vent is covered by something, like a pan, remove it. While still cooking, you can clear the error by opening and closing the door a few times for about 3 seconds at a time. This will allow for the release of warm air and force some out of the vent. You can also turn off .
Door not fully latched, latch mechanism damaged, or door sensor fault.
Ensure door/lid is fully closed and latched. Check for obstructions preventing closure. Inspect door latch and strike for damage. Reset power at breaker for 30 seconds. If persists, door latch assembly or door sensor needs replacement. Estimated repair cost: $250-500.
This is rated as moderate repair. This may require a professional technician.
Search 49,307 Samsung manuals in our database for installation specs, wiring diagrams, and service procedures.