The cooking zone has overheated. It has switched off to protect the work surface. 1. Wait until the electronics have cooled down sufficiently. 2. Switch the cooking zone back on and you can continue to cook. See more
The cooking zone has overheated. It has switched off to protect the work surface. 1. Wait until the electronics have cooled down sufficiently. 2. Switch the cooking zone back on and you can continue to cook. See more
Likely cause: Heating element failed, thermostat drift, or control board fault
Check that the heating element is not cracked or corroded. Verify thermostat settings. Reset power at breaker for 30 seconds. If persists, heating element or thermostat needs replacement.
Difficulty: Moderate Repair
Consider calling a professional for this repair.
https://www.bosch-home.com/us/owner-support/error-codes/slide-in-ranges
The cooking zone has overheated. It has switched off to protect the work surface. 1. Wait until the electronics have cooled down sufficiently. 2. Switch the cooking zone back on and you can continue to cook. See more.
Heating element failed, thermostat drift, or control board fault.
Check that the heating element is not cracked or corroded. Verify thermostat settings. Reset power at breaker for 30 seconds. If persists, heating element or thermostat needs replacement. Estimated repair cost: $250-500.
This is rated as moderate repair. This may require a professional technician.
Search 11,371 Bosch manuals in our database for installation specs, wiring diagrams, and service procedures.