The appliance is not connected properly. 1. Disconnect the appliance from the power supply. 2. Make sure the appliance has been connected as shown in the circuit diagram. See more
The appliance is not connected properly. 1. Disconnect the appliance from the power supply. 2. Make sure the appliance has been connected as shown in the circuit diagram. See more
Likely cause: Power outage, circuit breaker trip, or internal short circuit
Check that the circuit breaker has not tripped. Verify the unit is receiving 120V/240V at the outlet. Reset power at breaker for 30 seconds. If the breaker trips again, there is a short circuit that needs professional diagnosis.
Difficulty: Moderate Repair
Consider calling a professional for this repair.
https://www.bosch-home.com/us/owner-support/error-codes/slide-in-ranges
The appliance is not connected properly. 1. Disconnect the appliance from the power supply. 2. Make sure the appliance has been connected as shown in the circuit diagram. See more.
Power outage, circuit breaker trip, or internal short circuit.
Check that the circuit breaker has not tripped. Verify the unit is receiving 120V/240V at the outlet. Reset power at breaker for 30 seconds. If the breaker trips again, there is a short circuit that needs professional diagnosis. Estimated repair cost: $250-500.
This is rated as moderate repair. This may require a professional technician.
Search 11,371 Bosch manuals in our database for installation specs, wiring diagrams, and service procedures.