Bosch e011 Error Code: Meaning, Fix & Cost

What e011 Means

Touch sensor failure on oven control panel. 1. Clean the control panel and wipe it dry. 2. Turn the appliance off at the circuit breaker and wait five minutes. 3. Turn the circuit breaker back on. 4. If the problem persists, contact Bosch Customer Support at 1-800-944-2904 for assistance or to book a service visit. See more

Likely cause: Sensor wire broken, sensor degraded, or control board not reading sensor

Estimated Repair Cost $250-500

How to Fix It

Check sensor wiring for damage or disconnection. Test sensor resistance with a multimeter (compare to spec in service manual). Reset power at breaker for 30 seconds. If sensor reads out of range, replace the sensor.

Difficulty: Moderate Repair

Consider calling a professional for this repair.

Official Reference

https://www.bosch-home.com/us/owner-support/error-codes/freestanding-ranges

Related Guides & Resources

Frequently Asked Questions

What does the Bosch e011 error code mean?

Touch sensor failure on oven control panel. 1. Clean the control panel and wipe it dry. 2. Turn the appliance off at the circuit breaker and wait five minutes. 3. Turn the circuit breaker back on. 4. If the problem persists, contact Bosch Customer Support at 1-800-944-2904 for assistance or to book a service visit. See more.

What causes the e011 code on a Bosch range?

Sensor wire broken, sensor degraded, or control board not reading sensor.

How do I fix the e011 error on my Bosch range?

Check sensor wiring for damage or disconnection. Test sensor resistance with a multimeter (compare to spec in service manual). Reset power at breaker for 30 seconds. If sensor reads out of range, replace the sensor. Estimated repair cost: $250-500.

Is the e011 error code a DIY fix or do I need a professional?

This is rated as moderate repair. This may require a professional technician.