Home
Home › Articles › LG tE Error Code

LG tE Error Code: Heating Problem — How to Fix It

Medium LG Washer Updated August 2026
Error Code
tE

LG Washer tE error — The water temperature is outside the expected range. The thermistor or heating element has failed. Thermistor: $70–$120. Heating element: $120–$200. / Failed heating element, blown thermal fuse, or tripped circuit breaker Fix: Check circuit breaker for tripped breaker. Verify 240V supply at terminal block (use multimeter). Te

What Causes the LG tE Error?

The water temperature is outside the expected range. The thermistor or heating element has failed. Thermistor: $70–$120. Heating element: $120–$200. / Failed heating element, blown thermal fuse, or tripped circuit breaker

How to Fix the LG tE Error

Try these steps in order. Most LG tE errors can be resolved with basic troubleshooting:

  1. Power cycle the appliance. Unplug it for 5 minutes, then plug it back in. This resets the control board and clears temporary error states.
  2. Check circuit breaker for tripped breaker. Verify 240V supply at terminal block (use multimeter). Test heating element for continuity (should read 10-40 ohms). Check thermal fuse (should read 0 ohms). Inspect heating element for visible burn spots.
  3. Check for obvious issues. Make sure the appliance is level, all connections are secure, and there are no visible obstructions or leaks.
  4. Run a test cycle. After addressing the likely cause, run a short cycle to see if the error returns.
⚠️ Safety Note: Always unplug the appliance before inspecting internal components. If you are not comfortable working on the appliance, contact a certified technician. Continuing to run an appliance with an active error code can cause further damage.

When to Call a Professional

If the error code persists after trying the steps above, it's time to call in a pro. You'll need a technician if:

Preventing the tE Error

A few simple habits can keep this error from showing up again:

Common Questions

What does the LG tE error code mean?

LG Washer tE error — The water temperature is outside the expected range. The thermistor or heating element has failed. Thermistor: $70–$120. Heating element: $120–$200. / Failed heating element, blown thermal fuse, or tripped circuit breaker Fix: Check circuit breaker for tripped breaker. Verify 240V supply at terminal block (use multimeter). Te This code typically indicates the water temperature is outside the expected range. the thermistor or heating element has failed. thermistor: $70–$120. heating element: $120–$200. / failed heating element, blown thermal fuse, or tripped circuit breaker.

How do I fix a LG tE error?

Check circuit breaker for tripped breaker. Verify 240V supply at terminal block (use multimeter). Test heating element for continuity (should read 10-40 ohms). Check thermal fuse (should read 0 ohms). Inspect heating element for visible burn spots. If the problem persists after these steps, the issue may require professional attention.

Is the LG tE error code serious?

The LG tE error is rated technician. This is a serious error that may require professional repair. Do not keep running the appliance while this code is displayed, as it can cause further damage.

How often does the LG tE error occur?

The tE code is one of the most common errors reported on LG washers. It typically appears when the appliance detects an abnormal condition during a cycle. Most occurrences can be resolved with basic maintenance.

Need More Help?

Check our full reference for this error code, including component values, related codes, and step-by-step fix instructions.

View LG tE Error Code →
LG OELG CLLG LELG UE
📖 LG Official Support - Front Load Washer Error Codes
Appliance Medic — Free repair reference for technicians · Browse Brands · Repair Guides · Privacy · Terms