Home
Home › Articles › LG IE Error Code

LG IE Error Code: Water Inlet Problem — How to Fix It

Medium LG Washer Updated August 2026
Error Code
IE

LG Washer IE error — No water or slow water fill. Verify both supply valves are open. Clean the inlet filter screens (where hoses connect to the washer). Water inlet valve replacement: $90–$160. / Blocked inlet filter screen, closed supply valve, or kinked water hose Fix: Check that water supply valves are fully open. Clean inlet filter screens (turn off water, unscrew h

What Causes the LG IE Error?

No water or slow water fill. Verify both supply valves are open. Clean the inlet filter screens (where hoses connect to the washer). Water inlet valve replacement: $90–$160. / Blocked inlet filter screen, closed supply valve, or kinked water hose

How to Fix the LG IE Error

Try these steps in order. Most LG IE errors can be resolved with basic troubleshooting:

  1. Power cycle the appliance. Unplug it for 5 minutes, then plug it back in. This resets the control board and clears temporary error states.
  2. Check that water supply valves are fully open. Clean inlet filter screens (turn off water, unscrew hose, remove small mesh screen). Check for kinked supply hoses. If water is cold, check GFCI outlet near appliance.
  3. Check for obvious issues. Make sure the appliance is level, all connections are secure, and there are no visible obstructions or leaks.
  4. Run a test cycle. After addressing the likely cause, run a short cycle to see if the error returns.
⚠️ Safety Note: Always unplug the appliance before inspecting internal components. If you are not comfortable working on the appliance, contact a certified technician. Continuing to run an appliance with an active error code can cause further damage.

When to Call a Professional

If the error code persists after trying the steps above, it's time to call in a pro. You'll need a technician if:

Preventing the IE Error

A few simple habits can keep this error from showing up again:

Common Questions

What does the LG IE error code mean?

LG Washer IE error — No water or slow water fill. Verify both supply valves are open. Clean the inlet filter screens (where hoses connect to the washer). Water inlet valve replacement: $90–$160. / Blocked inlet filter screen, closed supply valve, or kinked water hose Fix: Check that water supply valves are fully open. Clean inlet filter screens (turn off water, unscrew h This code typically indicates no water or slow water fill. verify both supply valves are open. clean the inlet filter screens (where hoses connect to the washer). water inlet valve replacement: $90–$160. / blocked inlet filter screen, closed supply valve, or kinked water hose.

How do I fix a LG IE error?

Check that water supply valves are fully open. Clean inlet filter screens (turn off water, unscrew hose, remove small mesh screen). Check for kinked supply hoses. If water is cold, check GFCI outlet near appliance. If the problem persists after these steps, the issue may require professional attention.

Is the LG IE error code serious?

The LG IE error is rated technician. This is a serious error that may require professional repair. Do not keep running the appliance while this code is displayed, as it can cause further damage.

How often does the LG IE error occur?

The IE code is one of the most common errors reported on LG washers. It typically appears when the appliance detects an abnormal condition during a cycle. Most occurrences can be resolved with basic maintenance.

Need More Help?

Check our full reference for this error code, including component values, related codes, and step-by-step fix instructions.

View LG IE Error Code →
LG OELG CLLG LELG UE
📖 LG Official Support - IE Error (Washer)
Appliance Medic — Free repair reference for technicians · Browse Brands · Repair Guides · Privacy · Terms