GE F2 Error Code: Temperature Sensor — How to Fix It
Medium
GE Oven
Updated August 2026
GE Oven F2 error — Indicated by GE oven fault code Fix: Check oven temperature sensor and control board
What Causes the GE F2 Error?
Indicated by GE oven fault code
How to Fix the GE F2 Error
Try these steps in order. Most GE F2 errors can be resolved with basic troubleshooting:
- Power cycle the appliance. Unplug it for 5 minutes, then plug it back in. This resets the control board and clears temporary error states.
- Check oven temperature sensor and control board
- Check for obvious issues. Make sure the appliance is level, all connections are secure, and there are no visible obstructions or leaks.
- Run a test cycle. After addressing the likely cause, run a short cycle to see if the error returns.
⚠️ Safety Note: Always unplug the appliance before inspecting internal components. If you are not comfortable working on the appliance, contact a certified technician. Continuing to run an appliance with an active error code can cause further damage.
When to Call a Professional
If the error code persists after trying the steps above, it's time to call in a pro. You'll need a technician if:
- The error code keeps coming back after multiple power cycles
- You see water leaks, burning smells, or unusual noises
- The appliance is out of warranty and you're not comfortable with DIY repairs
- The fix requires replacing internal components like motors, pumps, or control boards
Preventing the F2 Error
A few simple habits can keep this error from showing up again:
- Follow the manufacturer's maintenance schedule (clean filters, descale, inspect hoses)
- Don' overload the appliance — leave room for clothes/food to move
- Use the correct detergent and dosage for your machine
- Keep water supply lines clean and unobstructed
Common Questions
What does the GE F2 error code mean?
GE Oven F2 error — Indicated by GE oven fault code Fix: Check oven temperature sensor and control board This code typically indicates indicated by ge oven fault code.
How do I fix a GE F2 error?
Check oven temperature sensor and control board If the problem persists after these steps, the issue may require professional attention.
Is the GE F2 error code serious?
The GE F2 error is rated technician. This is a serious error that may require professional repair. Do not keep running the appliance while this code is displayed, as it can cause further damage.
How often does the GE F2 error occur?
The F2 code is one of the most common errors reported on GE ovens. It typically appears when the appliance detects an abnormal condition during a cycle. Most occurrences can be resolved with basic maintenance.
Need More Help?
Check our full reference for this error code, including component values, related codes, and step-by-step fix instructions.
View GE F2 Error Code →
📖 GE Appliances Official Support